Hear from Our Customers
Plenty of homes in Conway were built between the 1950s and the 1990s, and a lot of them are block ranches on a concrete slab with terrazzo, tile or carpet on top. That’s the starting point for most hardwood floor installation in Conway, and it’s a different job than laying wood over a plywood subfloor.
When the install is planned around the slab, you get a floor that lies flat and stays tight. The concrete gets checked before any wood goes down, and then solid or engineered is chosen based on what the check shows. For many Conway ranches, engineered hardwood floor installation is the practical call. If part of your house has a wood subfloor, solid is back on the table.
If you have a converted carport or a Florida room, the new floor can run straight through from the original rooms without a lip or a hump at the doorway. Low spots get leveled and the transitions get finished with trim, so the addition stops looking like an addition. That’s what good wood floor installation in Conway looks like when you stand in the doorway.
And if you live near the Conway lakes with a screened pool out back, the wet-feet path from the sliding door to the kitchen deserves its own thinking. The right product by that door means you aren’t babying the floor.
We’ve been working on wood floors in Central Florida since 1990, and hardwood is all we do. There’s no carpet, tile or vinyl on the side. Our office is at 316 W Gulley Ave in Oakland, and our service area covers Seminole and Orange County, which includes Conway.
A good share of those years went into concrete slabs—the same thing sitting under many Conway houses. That’s why our first conversation is about what’s under your current floor, not which stain you like.
Customers’ reviews name Geste as the person leading their job. They describe the same things over and over: on time, clear communication, a clean jobsite. Google shows 5.0 across 11 reviews. That’s a small number, and we’d rather say so than round it up.
If you’re looking for a hardwood flooring installation company for Conway homeowners that tells you what the floor needs before you commit, call 407-701-2028 or text.
It starts with a walk through your house, not a phone quote. We look at what’s on the floor now, ask what’s under it, and talk about how you use each room, including where the pool or patio door is and whether anyone comes in wet.
Next comes the slab. It gets tested for moisture and checked for flatness, because a high spot or a dip shows up in a wood floor later. If the concrete needs leveling, that happens first. Old carpet comes up first. Whether terrazzo or tile can stay under the new floor or has to go depends on its condition, and you’ll know which before work starts.
Then the wood acclimates in your house for as long as that product calls for, since it varies. The method follows the product and the surface: nailed, glued or floated. Trim, molding and transitions go in last, and the jobsite gets cleaned up.
One local note: Conway is unincorporated Orange County, and many addresses read Orlando 32812, but some parcels sit inside City of Orlando limits. Flooring replacement typically doesn’t need a building permit, while structural or subfloor work can. We’ll flag that early so you can check with the right office before hardwood flooring installation in Conway gets scheduled.
Ready to get started?
Our hardwood floor installation services in Conway cover the whole floor, not just the boards. That means solid hardwood floor installation in Conway for rooms with a wood subfloor, and engineered hardwood floor installation for slab rooms and doors that open to a pool deck. It also means hardwood flooring installation that carries through hallways, closets and former carports so the house reads as one floor.
Underneath, subfloor preparation and leveling let an addition at a different height meet the original house cleanly. On top, trim, molding and transitions finish the edges. If you have a two-story home, including the newer lakefront builds, we offer staircase installation along with stain matching on treads, handrails and newel posts. Parquet and patterned layouts are on the list too, for anyone who wants more than straight planks.
If a leak or a storm damaged one room, board replacement and water damage restoration may keep you from tearing out the whole house. If your floor is worn but sound, we refinish too, so you get a straight answer on whether it needs replacing or just sanding and finishing.
The scope gets built from your house, whether you’re in Gatlin Heights, Shenandoah Park, Conway Acres or a gated community like Conway Landings. If you’re in a condo along Conway Road, check your association’s flooring rules before you order anything.
Yes, and in Conway it’s the most common starting point. Many of the mid-century ranches here are block construction on a concrete slab, so the wood has to be matched to concrete, not to a plywood subfloor.
Before anything is ordered, the slab gets checked for moisture and flatness. If it’s dry and flat enough, engineered hardwood floor installation in Conway is usually the practical choice, glued down or floated depending on the product. If it’s too wet, that has to be dealt with first, because wood on a damp slab is where cupping and gaps start. If it’s uneven, leveling comes before the wood does.
Solid hardwood usually wants a wood subfloor, so on a bare slab we’d talk through your options before recommending it. Either way, hardwood floor installation in Conway should start with the concrete, not the catalog.
The lakes themselves aren’t the deciding factor. The subfloor and the room are. A house on the Conway Chain of Lakes is still a house, and what matters is what’s under the floor and what comes in through the doors.
On a slab, engineered is usually the safer fit because its layered build handles movement better. Where you have a wood subfloor, such as a raised section or some additions, solid hardwood floor installation in Conway is a real option. Near a sliding door to a pool deck, or on the path from the boat ramp to the kitchen, engineered is often the better pick even in a room that could take solid.
We install both, so the recommendation follows your house. The top layer of engineered is real wood, and depending on its thickness it can often be refinished later, though we’d confirm that for the product you choose.
Sometimes. It depends on the condition of what’s there. Original terrazzo shows up in a lot of Conway’s 1960s and 1970s ranches, and tile or carpet over slab is just as common. Carpet comes up as a normal part of the job.
Terrazzo and tile are different. If the surface is solid, bonded and flat enough, it may be able to stay under the new floor. If it’s cracked, hollow-sounding or badly uneven, it has to be dealt with before wood goes on. We’ll look at it in person and tell you which way it goes before work starts.
That decision is also one of the biggest swing factors on a quote, along with leveling, species, plank width, pattern, stairs and how many rooms you’re doing. It’s why hardwood flooring installation in Conway can price out very differently from one house to the next. A number quoted over the phone without seeing the floor is a guess.
It depends on the house, and anyone who gives you a fixed number before seeing it is guessing. A typical Conway home runs around 1,800 square feet. The real variables are how much of it you’re doing, what has to come up first, and whether the slab needs leveling.
Old carpet is quick. Tile or terrazzo that has to come out takes longer. Leveling a converted carport so it sits flush with the rest of the house adds time, and so do stairs and patterns like herringbone. The wood also has to sit in your house before install, for as long as that product requires.
You’ll get a schedule at the estimate. Reviews of our work mention finishing on time or ahead of schedule, and the room order gets planned so you can keep living in the house during hardwood floor installation in Conway.
Start with what you have. If your existing floor is in good shape, species, plank width and stain can often be matched closely enough that the new boards blend in. If it’s faded or worn, the cleaner move may be refinishing the old floor along with the new so they finish as one surface.
This comes up a lot in Conway, where owners have lived in the same house for years and are extending wood into a converted carport, a Florida room or a new family room. Water-damaged boards can also be replaced by weaving new ones into the old pattern. One reviewer praised the stain match on stairs, handrails and newel posts.
Because we do both installation and refinishing, you get a straight answer on whether to patch or redo the whole floor. Good wood floor installation in Conway for an addition should look like one floor when you stand in the doorway.
Usually not for the flooring itself, but check. Conway is an unincorporated community in Orange County, so the county is typically the permitting authority. Flooring replacement typically doesn’t need a building permit, though structural or subfloor work can.
One catch is that many Conway homes have Orlando mailing addresses, and some parcels sit inside City of Orlando limits, where permits come from the city instead. The county or the city can confirm which applies to your address. We’ll tell you what your job involves so you know what to ask.
If you’re in a condo or a gated community like Conway Landings, association rules matter more than permits. Many have flooring or sound requirements, so get them in writing before you order wood. That’s worth sorting out before any hardwood floor installation in Conway gets scheduled.
