Hear from Our Customers
Drive Dean Road or E Colonial Drive and you’ll pass homes built around 1985, give or take. Floors that age have usually had a few owners and a few finishes, and nobody kept the paperwork. Hardwood floor restoration in Union Park often starts with a simple mystery: what is this floor, and what can it take?
Once that’s answered, the job gets clear. A dull floor with an intact finish may only need a recoat. Deep scratches or worn-through spots call for a full sand. A floor with a thin top layer might not be a candidate at all, and you’ll hear that before anyone starts a sander.
That’s the real payoff. You spend money on what the floor needs, not on what a flat quote assumed. Hardwood floor refinishing in Union Park also lets you change the look. If your floor has an orange, glossy finish like a lot of older homes, a warmer natural tone with a matte sheen is where homeowners are heading, according to NWFA’s 2026 member survey.
Two-story house? The stain gets matched on the treads, handrail, and newel post too. One customer called that out in a review, and it’s the detail that keeps a refinished staircase from looking like it belongs to a different house.
Harrington Hardwood Floors has done hardwood and nothing else since 1990. Geste Harms owns and runs the company, and the work covers Seminole and Orange County. If you’re searching for a hardwood floor refinishing company in Union Park, the point of that focus is simple: nobody here is learning wood on your floor.
We work out of Oakland, on the west side of Orange County. Union Park sits out on the east edge of where we work, where the SR 408 toll road ends at SR 50. We’d rather say that plainly than pretend to be around the corner.
Our 11 Google reviews are all five stars. They mention crews showing up on time every day, cleaning up after themselves, and blending in replacement boards so well that no transition strip was needed. We’re certified and fully insured, and you can reach us at 407-701-2028, Monday through Friday, 7:30 to 5.
First, we look at the floor with you. We check how thick the top layer of wood is, whether it’s been sanded before, whether any boards are dark from water, and whether it’s nailed down or glued. If your home is near the Little Econlockhatchee River, Jay Blanchard Park, or one of the retention ponds around Union Park, we ask about moisture too. A floor that’s still taking on moisture isn’t ready for finish.
Next comes prep and repair. Damaged boards get replaced and blended in, and gouges get filled before sanding, not skipped. Then comes hardwood floor sanding in Union Park homes: several passes with finer and finer grit, edges and corners included, so the stain takes evenly and you don’t see drum marks.
After sanding, you pick your stain from samples on your actual wood, in your own room’s light. Finish coats go on with drying time between each one. Hardwood floor refinishing in Union Park with water-based finish typically runs 3 to 5 days, and oil-based runs 5 to 7. Staining and repairs add days.
Indoor humidity changes drying time, so we plan around it instead of rushing a coat. We’ll explain what gets covered and how cleanup works, and we won’t promise a dust-free house.
Ready to get started?
Hardwood floor refinishing services in Union Park come down to three paths, and most jobs are one of them. A recoat, also called screen and coat, scuffs the old finish and puts a fresh coat over it. That’s what most people mean when they search for hardwood floor resurfacing in Union Park. A full sand and refinish takes the floor to bare wood, which is what deep scratches, worn-through spots, pet stains, and color changes need. Repair comes first when boards are damaged, and replacement boards get woven into the existing floor.
Stain and finish is the other half of the job. Hardwood floor stain and finish choices in Union Park homes often start with the same question: how do I get rid of the orange? Natural and warm brown tones with a matte or low sheen are on the rise, and a floor you already own can get there.
Union Park mixes single-family homes with small apartment buildings near UCF, Valencia College’s East Campus, and Full Sail. So the work ranges from a living room and hallway to a whole house between tenants, plus stairs with the stain matched to handrails and newel posts. Hardwood floor restoration in Union Park also means knowing when to stop. A thin engineered floor, or one that’s been sanded too many times, may not be a candidate, and we’ll tell you.
Usually, yes. The catch is that you can’t always tell by looking. A lot of Union Park homes are around 40 years old, so your floor may have been through a few owners and a few finishes. Solid hardwood can take several sandings. Engineered planks can too, but only if the top layer of real wood is thick enough.
You can get a clue yourself. Look at a cut edge near a floor vent or a doorway threshold. A thick layer of wood means more sandings left, and a paper-thin veneer line means you’re running low.
When we come out, we check that layer, look for signs of earlier sanding, and see whether the boards are nailed or glued. If your floor can’t be sanded, we’ll tell you that up front, before any sanding starts. Call or text 407-701-2028 and we’ll set up a time to look.
Resurfacing is a loose word, and most of the time it means a recoat. The finish gets cleaned and scuffed, then a new coat goes on top. It works when the floor looks dull or lightly scuffed but the wood underneath hasn’t been touched.
A full refinish sands everything down to bare wood. That’s what you need for deep scratches, pet stains, water marks, or a color change. Here’s a quick test: if scratches catch your fingernail, or you can see gray, bare wood in the walkways, a recoat won’t hide it.
For hardwood floor resurfacing in Union Park, the honest answer often sits in between. A floor that’s had several owners might be worn in the hallway and fine in the living room. We look at it in daylight and tell you which route makes sense. A recoat is faster and costs less, so if it’ll work, that’s what we’ll say.
Orlando-area sources like Angi put refinishing at roughly $3 to $7 per square foot. Angi’s Orlando numbers show an average job around $1,878, with most falling between $1,079 and $2,691. Those are market figures, not a quote from us.
What moves your number is square footage (bigger jobs usually cost less per square foot), stain versus clear finish, repairs, and stairs, which HomeGuide puts at $25 to $85 per step. Labor is about 80% of the total, so a bid that comes in far under the others usually means somebody is skipping sanding passes.
Plenty of Union Park homeowners get two or three quotes for hardwood floor refinishing, and you should. Ask each company what’s included and how many sanding passes they do. Then compare the answers, not just the totals.
For a typical job with water-based finish, plan on about 3 to 5 days. Oil-based finish runs closer to 5 to 7. Staining, board repairs, and stairs add time on top of that.
Humidity matters too. Central Florida’s wet season runs roughly June through September, and damp air slows drying. If your Union Park home is close to the Little Econlockhatchee River, Jay Blanchard Park, or one of the retention ponds nearby, the air inside may run damper. We plan the coats around that instead of rushing them.
We’ll tell you when you can walk on the floor in socks and when furniture can go back. Rugs wait longest, since they can trap moisture while the finish cures. Plan ahead for where pets and kids will stay on the days finish is going down.
That orange cast usually comes from an older finish that yellowed with age, sometimes on top of oak that already leans warm. Sanding to bare wood removes the old finish, which is why a recoat can’t fix it.
From there, you have two good directions. A natural look keeps the wood light, and a warm brown stain gives it depth. NWFA’s 2026 member survey shows natural and brown tones and low or matte sheen on the rise, while gray and high gloss are fading. Red-toned oak tends to fight cool grays, so we test samples on your actual floor before anything goes down.
For hardwood floor stain and finish in Union Park homes with stairs, we match the stain on the treads, handrail, and newel post. A customer wrote about exactly that in a June 2026 review.
Often, yes, as long as the date leaves room for the real schedule. Work backward from move-in day: about 3 to 5 days for a typical water-based job, more for oil-based finish, stain, or repairs, plus time before furniture and rugs go back.
Union Park sits among UCF, Valencia College’s East Campus, and Full Sail. If you’re getting a house or unit ready between tenants, an empty floor is the easiest time to do hardwood floor refinishing in Union Park. There’s nothing to move and no pets underfoot.
We can’t promise a date until we’ve seen the floor, and a recoat may get you there faster than a full sand if the wood allows it. Our reviews mention us showing up on time every day and finishing ahead of schedule. If your unit is in a building, check your association’s work-hour rules before you book.
Other Services we provide in Union Park
