Hear from Our Customers
Pine Hills homes get used. The average household here is 3.44 people, most of them families, and the median house was built in 1980, so plenty of floors have decades of foot traffic behind them. If yours is hardwood, whether it came with the house or went in later, hardwood floor restoration in Pine Hills is mostly a finish problem, and a finish can be replaced.
After a full sand and refinish, the dull trail from the kitchen to the hallway is gone. So are the chair-leg scratches at the dining table and the gray patches by the back door. You get one even surface again, with a finish tough enough for kids, pets, and a house that’s never empty.
Plenty of owners here have been in the same place for years and plan to stay, so the goal is a floor you stop thinking about. Hardwood floor stain and finish in Pine Hills is where you set that tone. Warm, natural colors and a low sheen are what NWFA’s 2026 member survey shows people choosing, and you can get there without pulling up a single board. If a screen and coat is all your floor needs, we’ll tell you that instead of selling you a full sand.
Harrington Hardwood Floors is a hardwood floor refinishing company serving Pine Hills from our base in Oakland, in Orange County. We’ve been at it since 1990, and hardwood is the only thing we do. There’s no tile crew or carpet crew learning wood on your floor.
Geste Harms owns the business, and his name comes up in our Google reviews. There are 11 of them, all five stars, and what people write about is plain and useful: on time every day, good communication, and a clean house when the crew leaves.
We’re a real company with a real address at 316 W Gulley Ave, Oakland, and a phone that gets answered at 407-701-2028. Text works too, and it’s usually the fastest way to reach us.
It starts with a look at the floor, either in person or from photos you text us. That’s when we figure out whether you need a full sand or a screen and coat, and what repairs are on the table.
Next the room gets cleared, gouges and gaps get filled, and boards that are too far gone get replaced and blended in. Hardwood floor sanding in Pine Hills homes means working through the old finish and the wear paths, sometimes old stain too, in passes from rougher to finer, with edges and stairs handled separately. If you’re changing color, stain goes on next. Then the finish goes down in coats, with drying time in between.
Timing is where people get surprised. With a water-based finish, most jobs run about 3 to 5 days, and oil-based can stretch to 5 to 7. Stain and repairs add time, and Central Florida’s wet season, roughly June through September, slows drying, so October through April is easier if your schedule bends. We’ll tell you when you can walk on the floor and when rugs and furniture can go back.
One local note: Pine Hills is unincorporated, so Orange County handles permits, not the City of Orlando. Refinishing is cosmetic and typically doesn’t need one, but if your project also touches structural, electrical, or plumbing work, check with Orange County Building Safety first.
Ready to get started?
Our hardwood floor refinishing services in Pine Hills cover the full range. That means a screen and coat on floors that are dull but intact, and a full sand down to bare wood when the finish is worn through. Stairs, handrails, and newel posts are part of the work, and so is stain matched to the rest of your house. We don’t sell named packages. It’s a recoat or a full refinish, with stain, stairs, and repairs added based on what your floor needs.
Repairs belong here too. Boards damaged by a leak or a failed supply line can be replaced and woven into the floor. One reviewer wrote that other contractors wanted a transition piece in her hallway, and we blended the new boards in instead.
Age matters in this part of Orange County. Robinswood and Pine Ridge Estates, the original subdivisions off Pine Hills Road, date to the early 1950s, and the neighborhoods toward Silver Star Road and Powers Drive grew in the decades after. Floors in houses that old may have been refinished before, or may be hardwood under carpet. Before we sand anything, we check how much wear layer is left, because that decides whether a refinish is safe. Engineered floors in particular may only allow one or two.
For hardwood floor refinishing in Pine Hills, the closest solid numbers are Angi’s Orlando figures: $3 to $7 per square foot, with most homeowners landing around $1,878 and a typical range of $1,079 to $2,691. Labor makes up about 80% of that, and bigger jobs usually get a lower per-square-foot rate because setup is spread over more floor.
What moves your number is square footage, wood species, how much repair the floor needs, stain versus a clear coat, the finish you pick, and stairs. HomeGuide lists stairs at $25 to $85 per step, so a staircase can change the total quickly.
Those are outside figures, not a quote from us. The only real number comes from someone looking at your floor, so text us photos or call 407-701-2028 and we’ll tell you what it needs.
Start with what the floor is showing you. A screen and coat works when the finish is dull and scuffed but still intact, with no deep scratches and no bare wood showing. It’s faster and costs less.
You need a full sand and refinish if the finish is worn through in the kitchen and hallway paths, if scratches are deep enough to catch a fingernail, if you want a different color, or if there are water or pet stains. In a busy Pine Hills house, where the average household is 3.44 people, those traffic paths wear through first.
People searching hardwood floor resurfacing in Pine Hills usually mean one of those two jobs, which is why quotes are so hard to compare. Ask every contractor whether they’re sanding to bare wood or just recoating. When one number is far lower than the rest, that’s often the reason.
Usually yes, but it depends on how much usable wood is left on top. Solid hardwood can take several refinishes, and sources disagree on exactly how many because it comes down to the thickness of the wear layer. Engineered floors can be refinished only if that top layer is thick enough, and often just once or twice.
Pine Hills was built out from the early 1950s through the 1990s, so a floor in an older house may have been sanded before, or may sit under carpet that went down decades ago. Neither one is a dealbreaker. We check board thickness and condition before we sand, and if a floor shouldn’t be sanded again, we’ll say so.
If you’re not sure what’s under your carpet or what’s already been done, text us a photo of a floor edge or a vent opening.
Most jobs take about 3 to 5 days with a water-based finish and 5 to 7 with an oil-based one. Staining and repairs add time, and Central Florida’s wet season, roughly June through September, slows drying. October through April is easier if you can pick your dates.
With kids and pets in the house, plan on the sanding and finish days being the disruptive ones. We’ll walk you through what to expect before we start, including which rooms you can keep using. Odor and walk-on timing depend on the finish, so ask us which one is going on your floor.
You’ll hear from us when it’s safe to walk on the floor and when rugs and furniture can go back. Reviewers mention we were on time every day, and one job finished ahead of schedule, which helps when you’re juggling work and school.
Yes. Stairs are a regular part of our work, and a June 2026 reviewer wrote that the stain on her stairs, handrails, and newel posts was matched exactly. That’s the hard part of a staircase. The treads wear fastest, but the rails and posts have to look like they belong to the same house.
If you’re planning hardwood floor stain and finish in Pine Hills and the stairs are in view of your main floor, do both at once so the color and sheen line up. Doing the floor now and the stairs in two years is how you end up with two different looks.
Stairs add to the total. HomeGuide lists $25 to $85 per step, and we’ll give you our number once we’ve seen the staircase. If you’re changing color, we’ll go through options with you. Warm, natural tones with a low sheen are what most people are choosing right now.
Often yes, but the order matters. Water-damage restoration companies dry out the structure first, and local searches are mostly full of them. Once everything is dry, someone has to look at the wood for cupped boards, dark stains, and gaps. That second step is hardwood floor restoration in Pine Hills, and it’s separate work.
Moderate marks can sand out. Boards that are too far gone get replaced and blended into the existing floor, then the whole floor is sanded and refinished so the repair doesn’t show as a patch. Heavy warping or a thin engineered top layer may mean replacement instead, and we’ll tell you if that’s your situation.
Here’s what we don’t do: we don’t handle the drying, and we don’t deal with your insurance company. If you’ve been searching hardwood floor refinishing near you after a leak, you’ve probably seen mostly mitigation companies. We pick up once they’re done.
Other Services we provide in Pine Hills
