Hear from Our Customers
If your home sits off Aloma Avenue or Howell Branch Road, there’s a good chance your floor has a history. Maybe it’s a leak from years back, a patched stretch near the kitchen, or a spot that never quite matched the rest. Most of Goldenrod went up between the 1950s and the 1980s as concrete-block homes on slabs, and some may still have original supply lines or cast-iron drains underneath.
So the first thing a hardwood flooring contractor in Goldenrod should give you is a straight answer. Is it a few boards or the whole room? Does the floor need a full sanding, or just a screen and coat? When boards do get replaced, they’re woven into the existing wood and matched, so the repair doesn’t announce itself.
The second outcome is the right floor over your slab. You’ll know whether engineered hardwood flooring in Goldenrod or solid wood makes sense for your house before anything gets ordered.
And if you rent the place out or you’re getting ready to list it, you get a floor finished when you were told, with a written scope that doesn’t shift halfway through.
Harrington Hardwood Floors has done one thing since 1990: hardwood. No carpet side of the business, no tile aisle. Installation, sanding, staining, finishing, repair, and staircases come from a certified, fully insured team. Geste Harms, the owner, has 30-plus years in the trade, and customers mention him by name in their reviews. Those reviews sit at 5.0 stars on Google, Birdeye, and Thumbtack, and the same words keep coming up: on time, clean, honest.
We work out of Oakland and serve Seminole and Orange County, which matters in Goldenrod because it straddles both. You don’t have to work out which side of the line you’re on. Plenty of Goldenrod addresses carry a Winter Park mailing address too, and that’s fine with us.
As a hardwood flooring company in Goldenrod, FL, we’re a small crew that answers texts. Whether you’re sourcing a hardwood floor or need help choosing species, widths, and finishes, what you really need is someone to source the floor and install it right.
It starts with a call or a text to 407-701-2028. Texting gets a faster reply. Tell us what’s going on with the floor and where you are in Goldenrod, and we’ll set up a free quote visit.
At the house, we look at the floor and ask about the house. How old is it? Is it on a slab? Has there ever been a leak? In an older block home, that last one matters most. Before we recommend a product, we check moisture, because wood over a damp slab is how you end up with cupping and gaps. If there’s been a leak, it needs to be fixed and the floor dry before any new board goes down.
Then you get an honest recommendation and a written scope: replace these boards, sand and refinish, or screen and coat and be done. If you approve it, we schedule the work. In the days before an install, keep your AC running like normal. Steady temperature helps the wood settle.
The work itself is straightforward. Boards come out or go in, the floor is sanded, stained if you want color, and finished in coats. We contain dust as much as the job allows, though no sander is dust-free, and we clean up when we’re done. Summer rainy season can affect timing, so we plan around it with you.
Ready to get started?
Installation, sanding, staining, finishing, repair, screen and coat, deep cleaning, and staircases are all hardwood, and they all come from the same crew. Each job is scoped around the floor in front of us rather than squeezed into a preset tier.
In a block home in Eastbrook or Woodside Village, that usually means sanding and refinishing original wood, repairing patched or water-damaged stretches, or bringing in new boards that blend with the old. If you’re replacing a floor, we’ll walk you through solid hardwood flooring in Goldenrod, FL against engineered hardwood flooring in Goldenrod, FL, and explain which one suits a slab and which asks more of the house.
If you want something beyond off-the-shelf, custom hardwood flooring in Goldenrod, FL means choosing the species, plank width, and stain together, so the floor looks like it belongs in your house.
Goldenrod also has newer two-story townhomes mixed in with the older ranches, and stairs are work we do often. Treads can be sanded, stained, and refinished, or replaced when they’re worn through. If you’re in a townhome with an association, check their flooring rules before you order anything.
For most older homes in Goldenrod, engineered hardwood flooring is the safer starting point. Much of the area’s housing is concrete-block construction on slabs from the 1950s through the 1980s. An engineered plank has a layered core that resists cupping and gapping better than a solid board, and the top layer is real hardwood.
Solid hardwood flooring can work, but it asks more of the house. You need a moisture test on the slab, the right species, a vapor barrier, and steady air conditioning. Manufacturers call for moisture testing before engineered planks go over concrete, so the test happens either way.
The best answer comes from looking at your slab, not from a rule of thumb. If you have any leak history, say so up front, because it changes what gets tested and what we’d recommend.
Look at the finish first, then the wood. If the floor looks dull and scuffed but the color is still good and the wood isn’t worn through, a screen and coat may be all it needs. That’s a light abrasion of the old finish and a fresh topcoat, with no sanding down to bare wood.
If you’ve got deep scratches, gray or worn paths, pet stains, water marks, or a finish that’s peeling, you’re looking at a full sand and refinish. Solid hardwood can usually be refinished about three to five times over its life, so a floor in an older Goldenrod house may still have plenty of wood left. Engineered floors depend on how thick the top layer is.
We’ll tell you which one your floor needs, even if that means the smaller job.
Often, yes. The order matters, though. The leak has to be found and fixed first, and the floor and slab need to dry out. Replacing boards before that is how people end up paying twice.
Some homes in Goldenrod’s older subdivisions may still have original supply lines or cast-iron drains under the slab. If you’ve noticed cupped boards, dark staining, or a section that feels soft, have a plumber check before anyone touches the floor.
Once the source is handled, the damaged boards are cut out and new ones are woven into the existing pattern. Matching comes down to species, grade, and how the stain and finish take, so the surrounding area is usually finished together to blend. If the damage runs across the whole room, we’ll say so rather than patch around it.
It depends on the floor, and we won’t throw out a number before seeing it. What moves the price: solid or engineered, the species, how much prep your slab needs, square footage, stairs, and how much repair comes before any finishing. Water-damaged boards add cost before the refinishing even starts.
For a rough national reference, HomeGuide puts installed solid hardwood at about $11 to $25 per square foot and engineered at about $9 to $20. A South Florida flooring retailer lists a narrower $6 to $14 range. Those are published cost-guide figures, not our quotes, and your job lands wherever those factors put it.
The way to get a real number is a free quote with someone looking at your floor. Ask every contractor for a written scope, so you can compare the same job side by side.
Usually, yes. Census figures put Goldenrod’s owner-occupancy at about 47.8%, so rentals make up a big share of homes here and turnover work is normal.
Between tenants, a floor that’s only dull might need just a screen and coat. A floor with pet stains or deep scratches needs a full refinish. If only a few boards are damaged, replacing and blending them often makes more sense than redoing the whole room.
What landlords and sellers generally need is a written scope, a start date that holds, and updates by text. We finish on time, leave the job site clean, and can hand off the keys to your next tenant or buyer without chasing.
Yes. Stairs come up in several of our reviews, including stair treads and staircases paired with new engineered floors.
Goldenrod has two kinds of homes. The older single-story ranches rarely have stairs. The newer two-story townhomes do, and stairs take the most wear in any house. Treads can be sanded, stained, and refinished, or replaced when they’re worn or damaged. If you’re putting in new floors, we do the stairs as part of the same job so the color and finish match from the landing down.
If you’re in a townhome, check your association’s rules on flooring changes before you order. It’s a quick call, and it can save you a headache after the work is done.
